LITTLE NOTE

AIWA A14-S1
Capturing Dark BRIGHT AND EVEN IF IN CONTRAST exaggerated, Still No KONTRAS.CHANGE R ABL R614: 150K

AIWA C20 KER
Raster Image ONLY OR IF ANY, ONLY DIRECT pause and lost. COLOR OR BLACK PUTIH.CHANGE IF ONLY AFT: 656

SHARP C14JO
ONLY SOME SORT IMAGES RASTER ONLY HAPPENS TO 12V LINE.CHANGE Q604 FOR FURTHER portion 12VOLT Go to tuner.

SHARP EXPRESSION 51X220
Quick View WITHOUT IMAGES WITH ON POSITION . BACK TO Standby (PROTEK). CHANGE R divider FOR 180V R621: 1 OHM

SANSUI SV-2050J
The image appear FILCKER and vibrates in lines thick DARK COLOUR.CHANGE c 708: 220/50V, C 517 AND 518: 100/160V.



SANYO CG21 XS2
TV LOCKED ON STANDBY.POWER POSITION TO START BUT BACK PROTEK.CUT OFF jumpers J830 or Change FBT.

DIGITEC DM172021
Can not save SAT PROGRAM IN SEARCH although transformer AFT (9074) and VIF (9073) IS GOOD.CHANGE D712 ZENER 5VOLT NEAR IC MEMORY MN12C201D

DIGITEC BLACK BEAUTY BB2071
VOLTAGE 300V and 115V THERE, FBT START ONLY FLASH, 12V IC FOR OSC.HOR ADA.TV still not START.CHANGEC76: 180N IN REGULATOR

DIGITEC / POLYTRON DM 143,031
SLOW TO START, blinking AND FIGURES swing wide GAMBAR.CHANGE C518: 100/35V. c514: 330/35V. C515: 680/560pF. R511: 5KOHM / 1%. R517: 15KOHM / 1%

DIGITEC DM143031A
FIRST TIMES switched image appear NO PICTURE. WHITE ALL .KEY PANEL NOT WORKI.TVOLTAGE OF 222V ONLY FOR ANY 12V AND 12V measured 10VOLT.CHANGER557: 330 OHM / 1 WATT

POLYTRON / DIGITEC BLACKBOX SERIES
TV ONLY vertical LINE.CONDITIONS PART horizontal component; 2.2 C / R 160V AND 3K9/2W OPEN SHORT.CHANGEC 390 ATAU470n/250V

POLYTRON GRANDMASTER GM 1481
FIGURES DO NOT sync and looks LOGO OF TV station appear in CENTER IN CENTRAL-Limit BLACK LINE .CHANGE R452: 50KOHM 1 / 8 WATT

POLYTRON / DIGITEC
IC TDA 8360/61 ONLY flat horizontal LINE.CHANGE R 401: 2M2 OHM

POLYTRON MINIMAX SERIES MX1452G
TV ONLY sometimes START and difficult to SHOW UP.CHANGE C507: 10/50 WITH 47/100V


SOLITRON SM37-98
POWER SUPPLY NOT ONLY START.B + 45 VOLT.GANTI D81: ZENER 4V7

FUJITEC FTC 1459
Image / Raster off the left AND BECOME A BLACK PUTIH. DROP IN B +. GANTIC 517: 33/160V

JVC AV-K SERIES KT21T2
Raster lines blanking WHITE 2 CM.CHANGE C 428: 100UF/50V.

JVC C 20 RNS
TV frequently BACK TO STAND BY. KEY POSITION AND POWER IN THE TV PROGRAM IN Click TV still can not START.CHANGE R751: 100KOHM

AKARI 20M88R
Raster BIGGER decline.CHANGE D809 IN4148 REGULATOR

AKARI CTV14
No Sound, IC ZILOG NORMAL.IC TA 8690AN STILL GOOD.CHANGE Q06: C3289.

AKARI14-20
IF FIGURES unstable haunting lines OSC HOR NOT AS TEPAT.CHANGEC DRIVERS horizontal 10uF/100V

JHONSON CTV147
vertical lines blanking IN 3 / 4 PART IN VOLUME ATAS.DAN BILA exaggerated, the image appear fester tottery TAK STABIL.CHANGE C119: 470/50V

SONY KV20XXX
IF POWER turned on Raster Image EMPTY AND ONLY DIRECT FULL.CHANGE R627 Sound: 4.7 OHM TO 5.5 V SUPPLY

SAMSUNG CS 5085
Capturing the bottom of the vertical LESS accompanied by lines . Sound piping WHEN TO standby. GANTI C407: 330/50V

PANASONIC TC-GOLDSOUND SERIES
horizontal LINE ONLY IF CONDITIONS Bright / NORMAL.CHANGE R 525: 120K / 470K

Goldstar SOUNDMAX
TV standby POSITION WITH LED Lamp FLICKER.CHANGE DIODA RU2K IN THE NEAR STR 6707 D IN4007.CHANGE 330ATAU470/35.

Goldstar / LG
TV frequently OFF TO ITS POSITION standby, IF POWER IN REMOTE Turn on TV START.BUT BACK TO BACK OFF AFTER HOURS TO POSITION STANDBY.CHANGE ELCO DRIVERS HOR 10UF/100V

CRYSTAL
TV standby ONLY WITHOUT out. USE REMOTE, press the POWER ON THE REMOTE AND KEY OK and hold TOGETHER CAN START TO TV itself.

Phillips GR1225

TV SLOW TO START CHANGE c5524: 82n/100V AND C254: 220uF/35V

SHARP 21 BN1
LESS KONTRAS. image appear SMEARING HAPPENS TO THE 9v measured 6v.CHANGEQ605: D882 REGULATOR OF 16V TO 9 VOLT.DARI PIN 7 KAKI FBT

FUJI ELECTRIC FCH-2100
FIGURES AND Sound very weak AS SEARCH WITHOUT ANTENNA.AUTO SEARCH NOT WORK, fine TUNING SO.COLOUR STILL BLACK WHITE.CHANGE X-TAL 4.43

INDOTECH 20 "
WHEN THE FIRST IMAGES Bright start shortlyDARK HAPPENS TO BE PART ABL R314: 12OKOHM

SANTEC C1428
TV standby KEY POSITION PANEL AND REMOTE NOT WORK.CHANGE X-TAL PROGRAM: 10M (10,000)

Sanken BAZZONEYE ST 2181
TV ONLY AND KEY POSITION STANDBY.REMOTE NOT FUNCTION.VOLTAGE FOR 24 V AND 12V DROP.CHANGE C 541: C 553 and 100/35: 470/16V