MENU SERVICE CODE code is a condition for entry into the "SERVICE MODE". In terms repair television ..
there are several ways, including using the code number or alphabet or a combination of both .. way is to use tricks with the hardware at the point right men-short/jumper / or switch you provide the (sharp, panasonic, Thomson, Phillips, etc.).
here I will give you some way / code to open a menu of services from some television general circulation on the plane .. in Indonesia tv output starting from 2000/01 up to now, as most manufacturers only modify feature only.
TOSHIBA: press firstMUTE IN REMOTE,then press MUTE on RC + MENU IN simultaneous TV .. (repeated)
Press Menu-Press DIREMOTE FIGURES 4,7,2,5
Press VOL (-) IN TV-Press and hold FIGURES 9
SANYO: MENU IN REMOTE + VOLUME UP TV
LG Flatron: Press OK, OK DIREMOTE IN TV REMOTE MENU + or MENU IN TV
TCL: press DISPLAY (OSD) DIREMOTE + VOLUME DOWN IN TV, hold 3 seconds
Phillips: POSITION STNDBY TV, press 0,6,2,5,9, MENU
POLYTRON: POSITION STNDBY TV, press and hold MENU IN REMOTE TO TV on FIGURES entries of the code in 1013.
PANASONIC: SHORT (connect right) PIN 'FA-1' TO 'FA-2' OR TP-8 TO GROUND
PANASONIC TX SERIES: Press VOL (-) IN TV + OSD
SHARP: SHORT KAKI (PIN) PIN 6 AND 7 ON shortly MCU IC (TDA 98XXX). SHORT
BACK to exit
SHARP EXPRESSION: Connect the
Jumper J800
HAVE PROVIDED AND TWO jumpers in parallel.
CRYSTAL: POSITION STNDBY TV, press VOLIME VOLUME UP + DOWN ON TV
and hold
AKARI: Press SLEEP IN REMOTE + TV MENU
SAMSUNG: POSITION IN REMOTE Standby press: MENU - PSTD - MUTE - POWER ON
SAMSUNG PLANO: POSITION standby, press IN REMOTE: DISPLAY-MENU-MUTE-POWER ON
PLANO DIGITAL SAMSUNG HD100: Standby-DISPLAY-MENU-MUTE-POWER
OR: Standby-MUTE-1-8-2-POWER ON
.
Sharbysyd, FUJITEC, BOOMBA:
CHINA TV'S AND OTHERWISE USING THE PROGRAM IC TYPE LC8632XX SERIES: Press MENU IN REMOTE twice - RECALL (Q. VIEW) - MUTE.
TV CHINA OTHER (KCl, MITOCHIBA, BAZZOMBA) Press VOLUME IN TO TV NOL.push RECCAL ONCE IN REMOTE, press and hold VOLUME (-) along with the TV press RECALL BACK IN REMOTE .. the process to re-enter the sub menu next exits to the service menu.
AIWA: KEY MENU repairs ADA IN REMOTE FOR THE KEY IN VOLUME (+), loading first.
JVC: Press and hold BERSAMAAN OSD + MUTE
OR Press and hold OSD + PICTURE
HITACHI: Press and hold KEY AVDI TV, turn TV POWER SWITCH
SONY: Standby-OSD - 5 - VOL (-) - POWER ON
RCA / THOMSON: Press and hold KEY IN VT TV + POWER SWITCH ON TV
Some brands CHINA TV also have a menu button on the service in original Remote controller
.
Perhaps there is input from the other friends?
ZIC electronic
www.zicelectronic.tk
thank's
